Base coat and top coat are the unsung heroes of every manicure with shellac, colour gel or gel: one makes sure the colour stays put, the other makes sure it shines and stays protected. If you skip one of them or apply it incorrectly, you'll often notice within just a few days. Here you'll learn exactly what base and top coat are, 5 reasons why they're essential and how to apply both correctly in 7 steps.
What is a base coat – and what is a top coat?
Both layers are usually clear – yet they have completely different jobs:
- Base coat: the bottom layer directly on the prepared natural nail. It's the bonding bridge between nail plate and colour.
- Top coat: the top layer over the colour. It seals the design, adds shine and absorbs scratches and everyday wear.
You can read in detail how to prepare the natural nail perfectly before the base in our article The perfect base for gel nails.
Shellac & UV polish vs. gel: what base and top are called
“Base” and “top” have different names depending on the system. So you don't get confused, here's an overview:
With shellac / UV polish
- Base and top are applied with the brush from the bottle and cured under the lamp.
- The BNC Shellac Sealer Base & Top is a 2-in-1 product: according to its description, it serves as a base for optimal adhesion of the colour layer and as a top coat for a beautiful shine. Curing: 120 seconds under the UV lamp or 60 seconds under the LED lamp. After sealing, remove the inhibition layer with cleaner; it is removed with acetone.
- You'll find matching colours in the Shellac / UV nail polish category, and the complete guide in How to apply shellac correctly.
With gel and colour gel
- Here the base coat is called bonding gel or base gel. The BNC Masterline UV/LED Base Bonding Gel clear has a thin viscosity, can be applied precisely and cures in 60 seconds under UV/LED light or 120 seconds in a UV lamp. More options: Base gels.
- The top coat is called finish or sealing gel – and there are two variants:
- No-wipe: The BNC Finish Gel High Gloss without inhibition layer needs no cleaner, is HEMA-free and, according to its description, does not yellow.
- Classic sealing gels: For example the BNC Masterline UV/LED Sealing Gel clear (thin to medium viscosity, intense shine) or the medium-viscosity, clear-tinted BNC Gloss Finish Gel. If a sticky film (inhibition layer) remains after curing, wipe it off with cleaner.
- All sealers at a glance: Finish gels.
For every finish, check the product description to see whether you need to cleanse afterwards – that's what determines the shine.
5 reasons why base & top coat are essential
1. Adhesion: the colour stays where it should
Colour on the bare natural nail lifts faster – especially at the edges. The base coat or bonding gel connects the prepared nail plate to the colour layer, making it the foundation of every long-lasting manicure.
2. Protection against discolouration
With a base, strong pigments don't sit directly on the nail plate. This clear intermediate layer can help prevent the natural nail from looking yellowish or tinted after removal.
3. Shine: the finish makes the look
Colour gel and shellac only look truly mirror-smooth with a top coat. Without sealing, the colour looks dull sooner – with a finish gel it gets that typical salon high gloss.
4. Durability through sealing and capping
The top coat protects the colour from scratches and wear. If every layer is also “capped” at the free edge, hardly any water can get between the layers – which noticeably extends wear time. How to cap correctly:
- Wipe the brush almost dry and run just the tip along the free edge.
- Cap every layer – base, colour and top.
- Not too thick: a bulge at the tip breaks more easily.
5. Protecting the natural nail
A clean base ensures that colour doesn't work directly on the nail plate, and the sealing keeps the system stable. As a thin protective layer, the BNC Shellac Sealer Base & Top also strengthens the natural nail a little – for noticeably more stability with soft or brittle nails, you're better off with a builder or fibreglass gel such as the BNC T3 Fibreglass Gel Clear.
Base, top or 2-in-1? The comparison
Applying base & top coat: a guide in 7 steps
- Prepare the nail: Push back the cuticle, file the shape and gently buff the surface. Remove all dust thoroughly.
- Dehydrate: Free the nail from moisture and oils with BNC Nail-Prep – it air-dries in approx. 30 seconds.
- Apply a thin base: Apply a very thin layer of base or bonding gel, leaving approx. 1 mm of space to the cuticle.
- Cap the edges: Run the brush horizontally across the free edge once (see reason 4).
- Cure: Cure under the lamp as stated in the product description, e.g. with the BNC UV/LED 26 watt lamp with 10/30/60-second timer.
- Apply colour: Shellac or colour gel in two thin layers, curing each one separately and capping it too.
- Seal with top coat: Apply the top coat evenly, cap the edge, cure. For products with an inhibition layer, wipe afterwards with BNC Cleaner Clear.
5 common mistakes – and how to avoid them
- Base too thick: Thick layers cure less well and can form ripples. Keep it ultra-thin.
- Touching the cuticle: If product sits on the skin, it quickly becomes a starting point for lifting.
- Handling the inhibition layer wrong: Forgetting to cleanse sealers with an inhibition layer – or wiping a no-wipe finish with cleaner unnecessarily, which can reduce the shine.
- Curing too briefly: Stick to the curing time in the product description; place all fingers fully under the lamp.
- Forgetting the top coat: Especially with colour gel, shine and durability suffer without sealing.
You'll find more tips for long wear in Making colour gel & shellac last longer. And if something does chip, our overview Gel problems & solutions will help you.
💡 Pro tip for salons
Set a fixed routine for each system: shellac clients get base & top from one bottle, gel clients get bonding gel plus finish gel. If you have lots of back-to-back appointments, a no-wipe finish saves you the cleanser step. Our guide Sealing gel for gel nails shows you which sealing gel suits your salon.
FAQ: Base coat & top coat
Can I use base and top from one bottle?
Yes, for shellac there are 2-in-1 products such as the BNC Shellac Sealer Base & Top, which according to its description serves as both base and sealer. With gel systems, on the other hand, you usually use a dedicated bonding gel and a separate finish gel.
Do I need a top coat with colour gel?
Yes, we recommend it. A finish or sealing gel protects the colour layer from scratches and gives that typical high gloss. Without sealing, colour gel looks dull sooner.
Why does my top coat turn matte?
Common causes are an inhibition layer that wasn't removed, curing too briefly or a no-wipe finish that was wiped with cleaner anyway. Also check that you're sticking to the curing time in the product description.
Can I use the UVA Top Coat for shellac or gel too?
According to its description, the BNC Nail Polish Sealer UVA Top Coat is a special sealer for nail polish: it cures in the UV lamp and can be removed with nail polish remover. For shellac and gel, you're better off using the matching sealer of the respective system.
How thick should the base coat be?
As thin as possible. A very thin layer adheres better, cures reliably and prevents the manicure from getting too thick at the cuticle.
More hold and shine for your nails
Bonding gel, shellac sealers and finish gels for your salon or at home: in the BNC online shop you'll find nail cosmetics & nail salon supplies in professional quality – for home and for the salon.
Browse the shop

All Gels
1-Phase Gels
Bonding Gels
Builder Gels
Finish Gels
Fiberglass Gels
French Gels
Make-up/Camouflage
Color Gels
Effect Gels
All Acrylics
Acrylic Powder
Polyacrylic Gels
Acrylic Liquids
Acrylic Accessories
All Nail Polishes
Nail Polish
Shellac
Stamping Polish
All Liquids
Cleaner
Primer & Nail Prep
Antifungal
No Lines
Remover
All Nail Art
Rhinestones, Effects & Pigments
One Stroke & Stamping
Stickers & Nail Foils
All Products
Creams
Nail Oils
Hygiene & Disinfection
UV/LED Lamps & Desk Lamps
Nail Drills & Bits
Files & Buffers
Brushes
Tools
Empty Containers
Display & Storage
Nail Extension / Repair
Sets




















Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.