Base Coat

Base Coat & Top Coat: Why They're Essential for Shellac and Gel

Base Coat und Top Coat: Nageldesignerin mit rosa Handschuhen trägt klaren Base Coat auf den Nagel einer Kundin auf, im Hintergrund der BNC Shellac Versiegler

Base coat and top coat are the unsung heroes of every manicure with shellac, colour gel or gel: one makes sure the colour stays put, the other makes sure it shines and stays protected. If you skip one of them or apply it incorrectly, you'll often notice within just a few days. Here you'll learn exactly what base and top coat are, 5 reasons why they're essential and how to apply both correctly in 7 steps.

What is a base coat – and what is a top coat?

Both layers are usually clear – yet they have completely different jobs:

  • Base coat: the bottom layer directly on the prepared natural nail. It's the bonding bridge between nail plate and colour.
  • Top coat: the top layer over the colour. It seals the design, adds shine and absorbs scratches and everyday wear.

You can read in detail how to prepare the natural nail perfectly before the base in our article The perfect base for gel nails.

Shellac & UV polish vs. gel: what base and top are called

“Base” and “top” have different names depending on the system. So you don't get confused, here's an overview:

With shellac / UV polish

  • Base and top are applied with the brush from the bottle and cured under the lamp.
  • The BNC Shellac Sealer Base & Top is a 2-in-1 product: according to its description, it serves as a base for optimal adhesion of the colour layer and as a top coat for a beautiful shine. Curing: 120 seconds under the UV lamp or 60 seconds under the LED lamp. After sealing, remove the inhibition layer with cleaner; it is removed with acetone.
  • You'll find matching colours in the Shellac / UV nail polish category, and the complete guide in How to apply shellac correctly.

With gel and colour gel

For every finish, check the product description to see whether you need to cleanse afterwards – that's what determines the shine.

5 reasons why base & top coat are essential

1. Adhesion: the colour stays where it should

Colour on the bare natural nail lifts faster – especially at the edges. The base coat or bonding gel connects the prepared nail plate to the colour layer, making it the foundation of every long-lasting manicure.

2. Protection against discolouration

With a base, strong pigments don't sit directly on the nail plate. This clear intermediate layer can help prevent the natural nail from looking yellowish or tinted after removal.

3. Shine: the finish makes the look

Colour gel and shellac only look truly mirror-smooth with a top coat. Without sealing, the colour looks dull sooner – with a finish gel it gets that typical salon high gloss.

4. Durability through sealing and capping

The top coat protects the colour from scratches and wear. If every layer is also “capped” at the free edge, hardly any water can get between the layers – which noticeably extends wear time. How to cap correctly:

  • Wipe the brush almost dry and run just the tip along the free edge.
  • Cap every layer – base, colour and top.
  • Not too thick: a bulge at the tip breaks more easily.

5. Protecting the natural nail

A clean base ensures that colour doesn't work directly on the nail plate, and the sealing keeps the system stable. As a thin protective layer, the BNC Shellac Sealer Base & Top also strengthens the natural nail a little – for noticeably more stability with soft or brittle nails, you're better off with a builder or fibreglass gel such as the BNC T3 Fibreglass Gel Clear.

Base, top or 2-in-1? The comparison

Base coat / bonding gel Top coat / finish gel 2-in-1 base & top
Job Adhesion between nail and colour Shine and protection of the colour Both from one bottle
Position Directly on the prepared natural nail On top, over the colour Bottom and top
Curing Masterline bonding gel: 60 s UV/LED, 120 s UV As per product description, e.g. Masterline sealing gel: 60 s LED, 120 s UV Shellac sealer: 60 s LED, 120 s UV
When to use Gel, colour gel, sculpting As the final layer for gel, colour gel, sculpting Shellac / UV polish
Advantage Specially designed for adhesion Choice of with/without inhibition layer Fewer products, faster routine

Applying base & top coat: a guide in 7 steps

  1. Prepare the nail: Push back the cuticle, file the shape and gently buff the surface. Remove all dust thoroughly.
  2. Dehydrate: Free the nail from moisture and oils with BNC Nail-Prep – it air-dries in approx. 30 seconds.
  3. Apply a thin base: Apply a very thin layer of base or bonding gel, leaving approx. 1 mm of space to the cuticle.
  4. Cap the edges: Run the brush horizontally across the free edge once (see reason 4).
  5. Cure: Cure under the lamp as stated in the product description, e.g. with the BNC UV/LED 26 watt lamp with 10/30/60-second timer.
  6. Apply colour: Shellac or colour gel in two thin layers, curing each one separately and capping it too.
  7. Seal with top coat: Apply the top coat evenly, cap the edge, cure. For products with an inhibition layer, wipe afterwards with BNC Cleaner Clear.

5 common mistakes – and how to avoid them

  • Base too thick: Thick layers cure less well and can form ripples. Keep it ultra-thin.
  • Touching the cuticle: If product sits on the skin, it quickly becomes a starting point for lifting.
  • Handling the inhibition layer wrong: Forgetting to cleanse sealers with an inhibition layer – or wiping a no-wipe finish with cleaner unnecessarily, which can reduce the shine.
  • Curing too briefly: Stick to the curing time in the product description; place all fingers fully under the lamp.
  • Forgetting the top coat: Especially with colour gel, shine and durability suffer without sealing.

You'll find more tips for long wear in Making colour gel & shellac last longer. And if something does chip, our overview Gel problems & solutions will help you.

💡 Pro tip for salons

Set a fixed routine for each system: shellac clients get base & top from one bottle, gel clients get bonding gel plus finish gel. If you have lots of back-to-back appointments, a no-wipe finish saves you the cleanser step. Our guide Sealing gel for gel nails shows you which sealing gel suits your salon.

FAQ: Base coat & top coat

Can I use base and top from one bottle?

Yes, for shellac there are 2-in-1 products such as the BNC Shellac Sealer Base & Top, which according to its description serves as both base and sealer. With gel systems, on the other hand, you usually use a dedicated bonding gel and a separate finish gel.

Do I need a top coat with colour gel?

Yes, we recommend it. A finish or sealing gel protects the colour layer from scratches and gives that typical high gloss. Without sealing, colour gel looks dull sooner.

Why does my top coat turn matte?

Common causes are an inhibition layer that wasn't removed, curing too briefly or a no-wipe finish that was wiped with cleaner anyway. Also check that you're sticking to the curing time in the product description.

Can I use the UVA Top Coat for shellac or gel too?

According to its description, the BNC Nail Polish Sealer UVA Top Coat is a special sealer for nail polish: it cures in the UV lamp and can be removed with nail polish remover. For shellac and gel, you're better off using the matching sealer of the respective system.

How thick should the base coat be?

As thin as possible. A very thin layer adheres better, cures reliably and prevents the manicure from getting too thick at the cuticle.

More hold and shine for your nails

Bonding gel, shellac sealers and finish gels for your salon or at home: in the BNC online shop you'll find nail cosmetics & nail salon supplies in professional quality – for home and for the salon.

Browse the shop

Reading next

Peel-off-Nagellack: entspannte Hand mit glänzend zartrosa lackierten Nägeln auf weißem Handtuch im Nagelstudio
Peel-off-Nagellack: entspannte Hand mit glänzend zartrosa lackierten Nägeln auf weißem Handtuch im Nagelstudio

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Products from this article

BNC Shellac Versiegler Base & Top von Buschmann Nail CosmeticsBNC Shellac Versiegler Base & Top – Ansicht 2
BNC Shellac Sealer Base & Top

from 7,99 € (excl. VAT)

Sale price9,51 €(0,80 €/ml)
BNC Masterline UV/LED Grundier Haftgel klar von Buschmann Nail CosmeticsBNC Masterline UV/LED Grundier Haftgel klar – Ansicht 2
BNC Masterline UV/LED Base Bonding Gel Clear

from 1,99 € (excl. VAT)

Sale priceFrom 2,37 € (0,79 €/ml)

Multiple sizes available

BNC Finish-Gel Hochglanz ohne Schwitzschicht 15ml von Buschmann Nail CosmeticsBNC Finish-Gel Hochglanz ohne Schwitzschicht 15ml – Ansicht 2
BNC Finish Gel High Gloss Without Inhibition Layer 15 ml

from 7,99 € (excl. VAT)

Sale price9,51 €(0,87 €/ml)
BNC Masterline UV/LED Versiegelungsgel klar von Buschmann Nail CosmeticsBNC Masterline UV/LED Versiegelungsgel klar – Ansicht 2
BNC Masterline UV/LED Sealing Gel Clear

from 1,99 € (excl. VAT)

Sale priceFrom 2,37 € (0,79 €/ml)

Multiple sizes available

BNC Glanz Finish-Gel von Buschmann Nail CosmeticsBNC Glanz Finish-Gel – Ansicht 2
BNC Gloss Finish Gel

from 1,99 € (excl. VAT)

Sale priceFrom 2,37 € (0,79 €/ml)

Multiple sizes available

BNC T3 Fiberglas-Gel Clear von Buschmann Nail CosmeticsBNC T3 Fiberglas-Gel Clear – Ansicht 2
BNC T3 Fiberglass Gel Clear

from 12,99 € (excl. VAT)

Sale priceFrom 15,46 € (1,11 €/ml)

Multiple sizes available

BNC Nail-Prep (Dehydrator) von Buschmann Nail Cosmetics
BNC Nail Prep (Dehydrator)

from 2,49 € (excl. VAT)

Sale priceFrom 2,96 € (197,54 €/1000ml)

Multiple sizes available

BNC Cleaner Klar von Buschmann Nail Cosmetics
BNC Cleaner Clear

from 2,89 € (excl. VAT)

Sale priceFrom 3,44 € (34,39 €/1000ml)

Multiple sizes available